200 mm x 310 mm x 51 mm KOYO 6040 deep groove ball bearings

200 mm x 310 mm x 51 mm KOYO 6040 deep groove ball bearings Warehouse offers AST BEARING OF AMERICA CORP. car parts and car accessories. We sell discount 200x310x51 Bearing online as well as 200 mm x 310 mm x 51 mm cheap machinery parts.

What is 6040 bearing cross reference?

Brand Name:KOYO
Model Number:6040
Series:555
Cone Part Number:554
Cup Part Number:552-B
Design Units:Imperial
Bearing Weight:4.6 lb
Cage Type:Stamped Steel
d:2.4375 in
D:4.8750 in
PDF 6040

Product Details

Series555
Cone Part Number554
Cup Part Number552-B
Design UnitsImperial
Bearing Weight4.6 lb
Cage TypeStamped Steel
d2.4375 in
D4.8750 in
D1 - Flange Outer Diameter5.1210 in
B - Cone Width1.4440 in
C - Cup Width1.1875 in
C1 - Cup Flange Width0.2500 in
T1 - Bearing Width1.500 in
T - Bearing Width to Flange0.5625 in
R - Cone Backface To Clear Radius10.14 in
r - Cup Backface To Clear Radius20.130 in
da - Cone Frontface Backing Diameter2.8 in
db - Cone Backface Backing Diameter3.03 in
Da - Cup Frontface Backing Diameter4.60 in
Ab - Cage-Cone Frontface Clearance0.08 in
Aa - Cage-Cone Backface Clearance0.07 in
a - Effective Center Location3-0.37 in
C90 - Dynamic Radial Rating (90 million revolutions)411100 lbf
C1 - Dynamic Radial Rating (1 million revolutions)542900 lbf
C0 - Static Radial Rating55700 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions)66590 lbf
K - Factor71.69
e - ISO Factor80.35
Y - ISO Factor91.73
G1 - Heat Generation Factor (Roller-Raceway)1091
G2 - Heat Generation Factor (Rib-Roller End)21.1
Cg - Geometry Factor110.111
View more

Company Profile

Phone +1-867-671-5490
View more

Related News

  • What is a rod knock? - Motor Vehicle Maintenance & RepairSep 12, 2015 — You can see most all of the internal parts of an engine in this exploded view below. The most common cause of rod knock is due to a spun bearing A rod knock is an...
  • Using Vibration Analysis To Detect Early Failure Of BearingsUnfortunately, many bearings fail prematurely in service because of may differ slightly from those predicted, but this is very dependent on the type of bearing,  Prediction of bearing...
  • Bearing Relubrication - McGuire Bearing CompanyUsing the chart and the formula, the bearing only needs 8 grams of grease every 10,000 hours. If your grease gun delivers around 1.35 grams per stroke, that means the bearing needs 6 strokes every 13...
  • Recommended Products

    All Products Contact Now