15 mm x 35 mm x 11 mm SNFA E 215 /S 7CE3 angular contact ball bearings

15 mm x 35 mm x 11 mm SNFA E 215 /S 7CE3 angular contact ball bearings 5.320 in Dimension N Manufacturers , Online Wholesale Suppliers‎ AST BEARING OF AMERICA CORP. 15 mm x 35 mm x 11 mm !

What is E 215 /S 7CE3 bearing cross reference?

Brand Name:SNFA
Model Number:E 215 /S 7CE3
Y1 - Geometry Factor:2.43
Oil Lubrication - T Seal:1500 rpm
Dimension N:5.320 in
Dimension F:7.44 in
Y2 - Geometry Factor:3.61
Dimension D:6.65 in
Locking Style:Eccentric
Oil Lubrication - B/C/O Seal:400 rpm
PDF E 215 /S 7CE3

Product Details

Y1 - Geometry Factor2.43
Oil Lubrication - T Seal1500 rpm
Dimension N5.320 in
Dimension F7.44 in
Y2 - Geometry Factor3.61
Dimension D6.65 in
Locking StyleEccentric
Oil Lubrication - B/C/O Seal400 rpm
Dimension H1.50 in
Pre Install Clearance Min0.095 mm
Size (mm)15 mm x 35 mm x 11 mm
View more

Company Profile

Phone +1-867-671-5490
View more

Related News

  • What is a rod knock? - Motor Vehicle Maintenance & RepairSep 12, 2015 — You can see most all of the internal parts of an engine in this exploded view below. The most common cause of rod knock is due to a spun bearing A rod knock is an...
  • Using Vibration Analysis To Detect Early Failure Of BearingsUnfortunately, many bearings fail prematurely in service because of may differ slightly from those predicted, but this is very dependent on the type of bearing,  Prediction of bearing...
  • Bearing Relubrication - McGuire Bearing CompanyUsing the chart and the formula, the bearing only needs 8 grams of grease every 10,000 hours. If your grease gun delivers around 1.35 grams per stroke, that means the bearing needs 6 strokes every 13...
  • Recommended Products

    All Products Contact Now