60 mm x 130 mm x 31 mm NSK HR31312J tapered roller bearings

Welcome NTN Brand to 60 mm x 130 mm x 31 mm the 60 mm x 130 mm x 31 mm NSK HR31312J tapered roller bearings AST BEARING OF AMERICA CORP. online seller.

What is HR31312J bearing cross reference´╝č

Brand Name:NSK
Model Number:HR31312J
unit type::Side Mount
overall height::4.7500 in
bearing type::Spherical Roller
lubrication type::Lubrication Fitting
d:1.9375 in
dynamic load capacity::26300 lbs
slot spacing::4.0000 in
radial static load capacity::26600 lbs
PDF HR31312J

Product Details

unit type:Side Mount
overall height:4.7500 in
bearing type:Spherical Roller
lubrication type:Lubrication Fitting
d1.9375 in
dynamic load capacity:26300 lbs
slot spacing:4.0000 in
radial static load capacity:26600 lbs
slot width:0.6900 in
expansion type:Non-Expansion Bearing (Fixed)
housing material:Cast Steel
B3.0200 in
locking device:Eccentric Collar
end type:Open
bearing material:Bearing Steel
rod hole diameter:1.0600 in
seal type:Labyrnith non-contacting, non-purging seal with DuPont™ Teflon®
series:QMTU
duty type:Heavy Duty
manufacturer product page:Click here
finish/coating:Powder Coated
manufacturer catalog:Click here
overall length:6.0400 in
manufacturer upc number:883450102155
height to center line:3.9400 in
Weight17 lbs
View more

Company Profile

Phone +1-867-671-5490
View more

Related News

  • What is a rod knock? - Motor Vehicle Maintenance & RepairSep 12, 2015 — You can see most all of the internal parts of an engine in this exploded view below. The most common cause of rod knock is due to a spun bearing A rod knock is an...
  • Using Vibration Analysis To Detect Early Failure Of BearingsUnfortunately, many bearings fail prematurely in service because of may differ slightly from those predicted, but this is very dependent on the type of bearing,  Prediction of bearing...
  • Bearing Relubrication - McGuire Bearing CompanyUsing the chart and the formula, the bearing only needs 8 grams of grease every 10,000 hours. If your grease gun delivers around 1.35 grams per stroke, that means the bearing needs 6 strokes every 13...
  • Recommended Products

    All Products Contact Now