75 mm x 130 mm x 25 mm ISB N 215 cylindrical roller bearings

75 mm x 130 mm x 25 mm ISB N 215 cylindrical roller bearings Engineering Calculator , 75x130x25 Bearing 2.0000 in d Manufacturing Service AST BEARING OF AMERICA CORP. . 75 mm x 130 mm x 25 mm Get Your Free.

What is N 215 bearing interchange´╝č

Brand Name:ISB
Model Number:N 215
Bearing number:39581/39528/Q
Size (mm):119.985x57.15x32.75
Bore Diameter (mm):119,985
Outer Diameter (mm):57,15
Width (mm):32,75
d:57.15 mm
D:119.985 mm
T:32.75 mm
PDF N 215

Product Details

Bearing number39581/39528/Q
Size (mm)119.985x57.15x32.75
Bore Diameter (mm)119,985
Outer Diameter (mm)57,15
Width (mm)32,75
d57.15 mm
D119.985 mm
T32.75 mm
d188.3 mm
B30.213 mm
C27 mm
r1,2 - min.8 mm
r3,4 - min.0.8 mm
a25 mm
da - max.76 mm
db - min.81 mm
Da - min.100 mm
Da - max.114 mm
Db - min.107 mm
Ca - min.5 mm
Cb - min.6 mm
ra - max.7 mm
rb - max.0.8 mm
Basic dynamic load rating - C142 kN
Basic static load rating - C0204 kN
Fatigue load limit - Pu23.6 kN
Reference speed4300 r/min
Limiting speed6300 r/min
Calculation factor - e0.33
Calculation factor - Y1.8
Calculation factor - Y01
View more

Company Profile

Phone +1-867-671-5490
View more

Related News

  • What is a rod knock? - Motor Vehicle Maintenance & RepairSep 12, 2015 — You can see most all of the internal parts of an engine in this exploded view below. The most common cause of rod knock is due to a spun bearing A rod knock is an...
  • Using Vibration Analysis To Detect Early Failure Of BearingsUnfortunately, many bearings fail prematurely in service because of may differ slightly from those predicted, but this is very dependent on the type of bearing,  Prediction of bearing...
  • Bearing Relubrication - McGuire Bearing CompanyUsing the chart and the formula, the bearing only needs 8 grams of grease every 10,000 hours. If your grease gun delivers around 1.35 grams per stroke, that means the bearing needs 6 strokes every 13...
  • Recommended Products

    All Products Contact Now