55 mm x 140 mm x 33 mm NKE 6411 deep groove ball bearings

Our highly-skilled and factory-trained service GARLOCK BEARINGS GGB Brand experts have the resources to help you with all your 55 mm x 140 mm x 33 mm NKE 6411 deep groove ball bearings needs - including routine maintenance, N/A Minimum Buy Quantity major 55 mm x 140 mm x 33 mm repairs, AST BEARING OF AMERICA CORP. warranty service, and 55x140x33 Bearing equipment inspections.

What is 6411 bearing interchangeļ¼Ÿ

Brand Name:NKE
Model Number:6411
Category:Plain Bearings Spherical Radial
Inventory:4.0
Minimum Buy Quantity:N/A
Weight:0.04
Product Group:B04264
Self Aligning:Yes
Rolling Element:Spherical Plain
Material - Outer Member:Steel
PDF 6411

Product Details

CategoryPlain Bearings Spherical Radial
Inventory4.0
Minimum Buy QuantityN/A
Weight0.04
Product GroupB04264
Self AligningYes
Rolling ElementSpherical Plain
Material - Outer MemberSteel
Material - BallSteel
Material - LinerNot Applicable
RelubricatableYes
EnclosureOpen
Other Features2 Piece | Single Fractured Outer Ring | Lubrication Groove in Outer Race
Long Description5/8" Bore; 15/32" Housing Width; 1-1/16" Outside Diameter; Steel Outer Member; Steel Ball; No Liner; 35/64" Overall Width; Relubricatable
Inch - MetricInch
UNSPSC31171515
Harmonized Tariff Code8483.30.80.70
NounBearing
Keyword 3Spherical
Keyword StringPlain Spherical Radial
Manufacturer Item NumberB10L
Weight / LBS0.079
D1.063 Inch | 27 Millimeter
d0.625 Inch | 15.875 Millimeter
B0.547 Inch | 13.894 Millimeter
Housing Width0.469 Inch | 11.913 Millimeter
View more

Company Profile

Phone +1-867-671-5490
View more

Related News

  • What is a rod knock? - Motor Vehicle Maintenance & RepairSep 12, 2015 — You can see most all of the internal parts of an engine in this exploded view below. The most common cause of rod knock is due to a spun bearing A rod knock is an...
  • Using Vibration Analysis To Detect Early Failure Of BearingsUnfortunately, many bearings fail prematurely in service because of may differ slightly from those predicted, but this is very dependent on the type of bearing,  Prediction of bearing...
  • Bearing Relubrication - McGuire Bearing CompanyUsing the chart and the formula, the bearing only needs 8 grams of grease every 10,000 hours. If your grease gun delivers around 1.35 grams per stroke, that means the bearing needs 6 strokes every 13...
  • Recommended Products

    All Products Contact Now