200 mm x 310 mm x 51 mm Loyal NJ1040 cylindrical roller bearings

200 mm x 310 mm x 51 mm Loyal NJ1040 cylindrical roller bearings with easy-to-use parts graphics, giving you the ability 200 mm x 310 mm x 51 mm to check parts availability, 200x310x51 Bearing pricing, examine remanufactured AST BEARING OF AMERICA CORP. 290000 N static load capacity: options.

What is NJ1040 bearing cross reference？

Brand Name:Loyal
Model Number:NJ1040
Series:3400
Cone Part Number:3479
Cup Part Number:3424YD
Design Units:Imperial
Bearing Weight:3.71 lb
Cage Type:Stamped Steel
Ab - Cage-Cone Frontface Clearance:0.05 in
d:1.4375 in
PDF NJ1040

Product Details

Series3400
Cone Part Number3479
Cup Part Number3424YD
Design UnitsImperial
Bearing Weight3.71 lb
Cage TypeStamped Steel
Ab - Cage-Cone Frontface Clearance0.05 in
d1.4375 in
D3.2500 in
B - Cone Width1.1721 in
C - Double Cup Width2.1875 in
T - Bearing Width across Cones2.6251 in
R - Cone Backface To Clear Radius10.03 in
r - Cup Frontface To Clear Radius20.03 in
db - Cone Backface Backing Diameter1.79 in
Da - Cup Frontface Backing Diameter2.99 in
Aa - Cage-Cone Backface Clearance0.04 in
C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)36100 lbf
C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)441000 lbf
C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)510600 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions)63820 lbf
K - Factor71.6
e - ISO Factor80.37
Y1 - ISO Factor91.85
Y2 - ISO Factor102.75
Cg - Geometry Factor110.0781
View more

Company Profile

AST BEARING OF AMERICA CORP.
Phone +1-867-671-5490
View more

Related News

  • Can a bearing knock Be Fixed?
    What is a rod knock? - Motor Vehicle Maintenance & RepairSep 12, 2015 — You can see most all of the internal parts of an engine in this exploded view below. The most common cause of rod knock is due to a spun bearing A rod knock is an...
  • How do you predict bearing failure?
    Using Vibration Analysis To Detect Early Failure Of BearingsUnfortunately, many bearings fail prematurely in service because of may differ slightly from those predicted, but this is very dependent on the type of bearing,  Prediction of bearing...
  • How often should you grease pillow block bearings?
    Bearing Relubrication - McGuire Bearing CompanyUsing the chart and the formula, the bearing only needs 8 grams of grease every 10,000 hours. If your grease gun delivers around 1.35 grams per stroke, that means the bearing needs 6 strokes every 13...

    • Recommended Products

    All Products Contact Now
    Contact Us