230/710YMBW507C08C4 TIMKEN Tapered Roller Bearings Tapered Single Imperial
Brand Name:TIMKEN
Model Number:230/710YMBW507C08C4
d:80 mm
D:125 mm
B:22 mm
d1:93.9 mm
d2:93.9 mm
D1:111.1 mm
b:2.8 mm
C1:11.1 mm
PDF 230/710YMBW507C08C4

Product Details

d80 mm
D125 mm
B22 mm
d193.9 mm
d293.9 mm
D1111.1 mm
b2.8 mm
C111.1 mm
C24.4 mm
C33.8 mm
r1,2 min.1.1 mm
r3,4 min.0.6 mm
a35 mm
da min.86 mm
db min.86 mm
Da max.119 mm
Db max.121 mm
ra max.1 mm
rb max.0.6 mm
dn96.9 mm
Basic dynamic load rating C62.4 kN
Basic static load rating C058.5 kN
Fatigue load limit Pu2.45 kN
Attainable speed for grease lubrication9500 r/min
Attainable speed for oil-air lubrication15000 r/min
Ball diameter Dw14.288 mm
Number of balls z20
Reference grease quantity Gref11.1 cm³
Preload class A GA390 N
Static axial stiffness, preload class A223 N/µm
Preload class B GB780 N
Static axial stiffness, preload class B291 N/µm
Preload class C GC1560 N
Static axial stiffness, preload class C386 N/µm
Preload class D GD3120 N
Static axial stiffness, preload class D523 N/µm
Calculation factor f1.13
Calculation factor f10.99
Calculation factor f2A1
Calculation factor f2B1.02
Calculation factor f2C1.05
Calculation factor f2D1.08
Calculation factor fHC1
Calculation factor e0.68
Calculation factor (single, tandem) Y20.87
Calculation factor (single, tandem) Y00.38
Calculation factor (single, tandem) X20.41
Calculation factor (back-to-back, face-to-face) Y10.92
Calculation factor (back-to-back, face-to-face) Y21.41
Calculation factor (back-to-back, face-to-face) Y00.76
Calculation factor (back-to-back, face-to-face) X20.67
Mass bearing0.85 kg
View more

Company Profile

AST BEARING OF AMERICA CORP.
Phone +1-867-671-5490
View more

Related News

  • Can a bearing knock Be Fixed?
    What is a rod knock? - Motor Vehicle Maintenance & RepairSep 12, 2015 — You can see most all of the internal parts of an engine in this exploded view below. The most common cause of rod knock is due to a spun bearing A rod knock is an...
  • How do you predict bearing failure?
    Using Vibration Analysis To Detect Early Failure Of BearingsUnfortunately, many bearings fail prematurely in service because of may differ slightly from those predicted, but this is very dependent on the type of bearing,  Prediction of bearing...
  • How often should you grease pillow block bearings?
    Bearing Relubrication - McGuire Bearing CompanyUsing the chart and the formula, the bearing only needs 8 grams of grease every 10,000 hours. If your grease gun delivers around 1.35 grams per stroke, that means the bearing needs 6 strokes every 13...

    • Recommended Products

    All Products Contact Now
    Contact Us