75 mm x 130 mm x 25 mm ISO 6215-2RS deep groove ball bearings

Online 75 mm x 130 mm x 25 mm ISO 6215-2RS deep groove ball bearings Expert.More 75 mm x 130 mm x 25 mm Choices. 75 mm x 130 mm x 25 mm ISO 6215-2RS deep groove ball bearings AST BEARING OF AMERICA CORP. in -30 to +300 &de operating temperature range: Stock & Ready Two-Bolt Base mounting: to Ship Now!

What is 6215-2RS bearing cross reference?

Brand Name:ISO
Model Number:6215-2RS
Bearing number:6224
Size (mm):120x215x40
Bore Diameter (mm):120
Outer Diameter (mm):215
Width (mm):40
d:120 mm
D:215 mm
B:40 mm
PDF 6215-2RS

Product Details

Bearing number6224
Size (mm)120x215x40
Bore Diameter (mm)120
Outer Diameter (mm)215
Width (mm)40
d120 mm
D215 mm
B40 mm
C40 mm
r min.2,1 mm
da min.131 mm
Da max.204 mm
ra max.2 mm
Weight5,15 Kg
Basic dynamic load rating (C)155 kN
Basic static load rating (C0)131 kN
(Grease) Lubrication Speed2900 r/min
(Oil) Lubrication Speed3400 r/min
CategorySingle Row Ball Bearing
Inventory0.0
Minimum Buy QuantityN/A
Weight / Kilogram5.704
Product GroupB00308
EnclosureOpen
Precision ClassABEC 1 | ISO P0
Maximum Capacity / Filling SlotNo
Rolling ElementBall Bearing
Snap RingNo
Internal Special FeaturesNo
Cage MaterialSteel
Internal ClearanceC0-Medium
Inch - MetricMetric
Long Description120MM Bore; 215MM Outside Diameter; 40MM Outer Race Diameter; Open; Ball Bearing; ABEC 1 | ISO P0; No Filling Slot; No Snap Ring; No Internal Special Features
UNSPSC31171504
Harmonized Tariff Code8482.10.50.68
NounBearing
Keyword StringBall
Manufacturer Item Number6224
Weight / LBS12.563
Outside Diameter8.465 Inch | 215 Millimeter
Outer Race Width1.575 Inch | 40 Millimeter
Bore4.724 Inch | 120 Millimeter
Bearing No.6224
r(min)2.1
Cr194
C0r131
Cu6.65
f014.4
Grease lub.2900
Oil lub.3400
da(min)131
Da(max)204
ra(max)2
(Refer.)Mass(kg)5.15
View more

Company Profile

Phone +1-867-671-5490
View more

Related News

  • What is a rod knock? - Motor Vehicle Maintenance & RepairSep 12, 2015 — You can see most all of the internal parts of an engine in this exploded view below. The most common cause of rod knock is due to a spun bearing A rod knock is an...
  • Using Vibration Analysis To Detect Early Failure Of BearingsUnfortunately, many bearings fail prematurely in service because of may differ slightly from those predicted, but this is very dependent on the type of bearing,  Prediction of bearing...
  • Bearing Relubrication - McGuire Bearing CompanyUsing the chart and the formula, the bearing only needs 8 grams of grease every 10,000 hours. If your grease gun delivers around 1.35 grams per stroke, that means the bearing needs 6 strokes every 13...
  • Recommended Products

    All Products Contact Now